Aviary Aviary Rebuild 2023 Rebuild 2023

Aviary

On April 15, 2015, my second container (488.5 x 243.5 x 259.1cm) for the new Bourke parakeet plant was delivered by CONTAINEX .
The double-glazed casement windows can be tilted or opened completely and not only ensure a good room climate, but also enough daylight.
The container is delivered from the factory with 6 cm thick thermal insulation. The interior walls and ceiling are clad with coated and easily washable chipboard. The floor is made of cement-bonded chipboard and is covered with a highly abrasion-resistant and non-slip floor covering.
The 8 new breeding cages (120 x 60 x 60cm) from OESIEG are made entirely of plastic, aluminum and stainless steel. The breeding cages have one-piece drawers and large doors, which makes regular cleaning very easy.
By removing the separating slide, 2 breeding cages can also be used as a stock cage (240 x 60 x 60cm) or as a small aviary.
The plastic nest boxes (25 x 21 x 25cm) can be pushed very easily into the breeding boxes and can also be operated from the outside, which greatly simplifies regular nest box checks.
Although made entirely of plastic, a nesting trough made of Meranti wood is used.
Assembly plan for the two 300W infrared heating panels from ECOFORT .
Two 300W infrared heating panels (90 x 30cm) mounted on the ceiling provide the necessary warmth in the bird room in winter.
Two LED lights 1400mm long, SOLAR STINGER type DAYLIGHT (6500 ° K LEDs) with 24 watts from ECONLUX are used for the lighting.
The night light LUNETTA (0.4 W) from OSRAM with a brightness sensor is used as night light (3 pieces for the entire bird room).
A NOVUS LHV 225 fan with 900m3 output per hour provides the necessary air circulation. The whole thing is controlled by a SUEVIA 248 T30 timer from CONRAD .
Bourke‘s Parrot Neopsephotus bourkii
© MB design - 2020 - www.mb-design.ch
© MB design - 2020 - www.mb-design.ch
Bourk‘s Parrot Neopsephotus bourkii

Aviary

On April 15, 2015, my second container (488.5 x 243.5 x 259.1cm) for the new Bourke parakeet plant was delivered by CONTAINEX .
The double-glazed casement windows can be tilted or opened completely and not only ensure a good room climate, but also enough daylight.
The container is delivered from the factory with 6 cm thick thermal insulation. The interior walls and ceiling are clad with coated and easily washable chipboard. The floor is made of cement-bonded chipboard and is covered with a highly abrasion-resistant and non-slip floor covering.
The 8 new breeding cages (120 x 60 x 60cm) from OESIEG are made entirely of plastic, aluminum and stainless steel. The breeding cages have one-piece drawers and large doors, which makes regular cleaning very easy.
By removing the separating slide, 2 breeding cages can also be used as a stock cage (240 x 60 x 60cm) or as a small aviary.
The plastic nest boxes (25 x 21 x 25cm) can be pushed very easily into the breeding boxes and can also be operated from the outside, which greatly simplifies regular nest box checks.
Although made entirely of plastic, a nesting trough made of Meranti wood is used.
Assembly plan for the two 300W infrared heating panels from ECOFORT .
Two 300W infrared heating panels (90 x 30cm) mounted on the ceiling provide the necessary warmth in the bird room in winter.
Two LED lights 1400mm long, SOLAR STINGER type DAYLIGHT (6500 ° K LEDs) with 24 watts from ECONLUX are used for the lighting.
The night light LUNETTA (0.4 W) from OSRAM with a brightness sensor is used as night light (3 pieces for the entire bird room).
A NOVUS LHV 225 fan with 900m3 output per hour provides the necessary air circulation. The whole thing is controlled by a SUEVIA 248 T30 timer from CONRAD .